View 2SK3299_10085.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
MOS FIELD EFFECT TRANSISTOR
2SK3299
SWITCHING N-CHANNEL POWER MOS FET INDUSTRIAL USE
DESCRIPTION
The 2SK3299 is N-Channel MOS FET device that features a low gate charge and excellent switching characteristics, designed for high voltage applications such as switching power supply, AC adapter.
ORDERING INFORMATION
PART NUMBER 2SK3299 2SK3299-S 2SK3299-ZJ PACKAGE TO-220AB TO-262 TO-263
FEATURES
*Low gate charge QG = 34 nC TYP. (VDD = 450 V, VGS = 10 V, ID = 10 A) *Gate voltage rating 30 V *Low on-state resistance RDS(on) = 0.75 MAX. (VGS = 10 V, ID = 5.0 A) *Avalanche capability ratings *Surface mount package available
ABSOLUTE MAXIMUM RATINGS (TA = 25C)
Drain to Source Voltage (VGS = 0 V) Gate to Source Voltage (VDS = 0 V) Drain Current (DC) (TC = 25C) Drain Current (Pulse)
Note1
VDSS VGSS ID(DC) ID(pulse) PT1 PT2 Tch Tstg
600 30 10 40 1.5 75 150 -55 to +150 10 66.7
V V A A W W C C A mJ
Total Power Dissipation (TA = 25C) Total Power Dissipation (TC = 25C) Channel Temperature Storage Temperature Single Avalanche Current Single Avalanche Energy
Note2
IAS EAS
Note2
Notes 1. PW 10 s, Duty Cycle 1% 2. Starting Tch = 25C, VDD = 150 V, RG = 25 , VGS = 20 V 0 V
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. D14060EJ1V0DS00 (1st edition) Date Published April 2000 NS CP(K) Printed in Japan
The mark * shows major revised points.
(c)
1999,2000
2SK3299
ELECTRICAL CHARACTERISTICS(TA = 25C)
CHARACTERISTICS Drain Leakage Current Gate Leakage Current Gate Cut-off Voltage Forward Transfer Admittance Drain to Source On-state Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Total Gate Charge Gate to Source Charge Gate to Drain Charge Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge SYMBOL IDSS IGSS VGS(off) | yfs | RDS(on) Ciss Coss Crss td(on) tr td(off) tf QG QGS QGD VF(S-D) trr Qrr VDD = 450 V VGS = 10 V ID = 10 A IF = 10 A, VGS = 0 V IF = 10 A, VGS = 0 V di/dt = 50 A/s TEST CONDITIONS VDS = 600 V, VGS = 0 V VGS = 30 V, VDS = 0 V VDS = 10 V, ID = 1 mA VDS = 10 V, ID = 5.0 A VGS = 10 V, ID = 5.0 A VDS = 10 V VGS = 0 V f = 1 MHz VDD = 150 V, ID = 5.0 A VGS(on) = 10 V RG = 10 2.5 3.2 0.68 1580 280 25 27 17 66 24 34 8.2 12.3 1.0 1.9 12 0.75 MIN. TYP. MAX. 100 100 3.5 UNIT
A
nA V S pF pF pF ns ns ns ns nC nC nC V
s C
TEST CIRCUIT 1 AVALANCHE CAPABILITY
D.U.T. RG = 25 PG. VGS = 20 0 V BVDSS VDS VGS 0 50 L VDD
TEST CIRCUIT 2 SWITCHING TIME
D.U.T. RL PG. RG VDD ID
90 % 90 %
VGS VGS
Wave Form
0
10 %
VGS(on)
90 %
IAS ID VDD
ID ID
Wave Form
0 10 %
10 %
= 1 s Duty Cycle 1 %
td(on) ton
tr td(off)
toff
tf
Starting Tch
TEST CIRCUIT 3 GATE CHARGE
D.U.T. IG = 2 mA 50 RL VDD
PG.
2
Data Sheet D14060EJ1V0DS00
2SK3299
* TYPICAL CHARACTERISTICS (TA = 25 C)
DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE 30 25 Pulsed
FORWARD TRANSFER CHARACTERISTICS 100
VGS = 10 V 8.0 V 6.0 V
ID - Drain Current - A
20 15 10 5 0 0 30 VDS - Drain to Source Voltage - V 10 20
ID - Drain Current - A
10
1
Tch = 125 C 75 C 25 C -25 C
0.1 VDS = 10 V Pulsed 15
40
0.01 0
5
10
VGS - Gate to Source Voltage - V
GATE TO SOURCE CUTOFF VOLTAGE vs. CHANNEL TEMPERATURE
FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT
VGS(off) - Gate to Source Cutoff Voltage - V
| yfs | - Forward Transfer Admittance - S
5.0
100
VDS = 10 V Pulsed Tch = -25 C 25 C 75 C 125 C
4.0
10
3.0
2.0
1
1.0 VDS = 10 V ID = 1 mA 0 -50 0 50 100 150
0.1 0.1
1
10
100
Tch - Channel Temperature - C
ID - Drain Current - A
RDS (on) - Drain to Source On-State Resistance -
DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE 3.0 Pulsed
RDS(on) - Drain to Source On-State Resistance -
DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT Pulsed
3.0
2.0
2.0
VGS = 10 V 20 V
1.0
ID = 10 A 5.0 A
1.0
0 0
0
5
10
15
0
1.0 10 ID - Drain Current - A
100
VGS - Gate to Source Voltage - V
Data Sheet D14060EJ1V0DS00
3
2SK3299
RDS (on) - Drain to Source On-state Resistance -
DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE
SOURCE TO DRAIN DIODE FORWARD VOLTAGE 100
3.0
ISD - Diode Forward Current - A
10
2.0
ID = 10 A 5.0 A
1
VGS = 10 V 0V
1.0 VGS = 10 V Pulsed 0 50 100 150 Tch - Channel Temperature - C
0.1
0 -50
0.01 0
0.5
1.0
Pulsed 1.5
VSD - Source to Drain Voltage - V
CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE 10000
td(on), tr, td(off), tf - Switching Time - ns
100
SWITCHING CHARACTERISTICS td(off) tf tr td(on)
Ciss, Coss, Crss - Capacitance - pF
Ciss 1000
10
100
Coss
1
10 Crss VGS= 0 V f=1 MHz 1 0.1 1 10 100 1000
0.1 0.1
VDD = 150 V VGS = 10 V RG = 10
1
10
100
VDS - Drain to Source Voltage - V
ID - Drain Current - A
REVERSE RECOVERY TIME vs. DRAIN CURRENT 10
trr - Reverse Recovery Time - s
VDS - Drain to Source Voltage - V
14 600 VDD = 450 V 300 V 150 V VGS 12 10 8 6 200 VDS ID = 10 A 0 0 10 20 30 4 2 0 40
1
400
0.1
0.01 0.1
1
10
100
ID - Drain Current - A
QG - Gate Charge - nC
4
Data Sheet D14060EJ1V0DS00
VGS - Gate to Source Voltage - V
di/dt = 50 A/s VGS = 0 V
DYNAMIC INPUT/OUTPUT CHARACTERISTICS 800 16
2SK3299
DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA 100 80
TOTAL POWER DISSIPATION vs. CASE TEMPERATURE
dT - Percentage of Rated Power - %
PT - Total Power Dissipation - W
20 40 60 80 100 120 140 160
70 60 50 40 30 20 10 0 0 20 40 60 80 100 120 140 160
80
60
40
20
0 0
Tch - Channel Temperature - C
TC - Case Temperature - C
FORWARD BIAS SAFE OPERATING AREA 100
ID(pulse)
PW =1 0 s
ID - Drain Current - A
10
RD
S(
on
)
Li
te mi
d
ID(DC)
10 0 s
Po we r
1
Di ss ipa tio n
1m s 3m s 10 30 ms 10 ms 0 m s
Lim ite d
0.1 1
TC = 25C Single Pulse 10 100 1 000 VDS - Drain to Source Voltage - V
TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH
Rth(t) - Transient Thermal Resistance - C/W
100
Rth(CH-A) = 83.3 C/W
10 Rth(CH-C) = 1.67 C/W
1
0.1
0.01 10
100
1m
10m
100m
1
10
100
1 000
PW - Pulse Width - s
Data Sheet D14060EJ1V0DS00
5
2SK3299
100
SINGLE AVALANCHE ENERGY vs. INDUCTIVE LOAD
SINGLE AVALANCHE ENERGY DERATING FACTOR
120
IAS - Single Avalanche Energy - mJ
10
IAS = 10 A
EAS
Energy Defrating Factor - %
100 80 60 40 20 0 25
VDD = 150 V RG = 25 VGS = 20 V0 V IAS 10 A
=6
6.7
mJ
1.0 RG = 25 VDD = 150 V VGS = 20 V 0 V Starting Tch = 25 C 0.1 100 10
1m
10m
50
75
100
125
150
L - Inductive Load - H
Starting Tch - Starting Channel Temperature - C
6
Data Sheet D14060EJ1V0DS00
2SK3299
PACKAGE DRAWINGS (Unit : mm)
1)TO-220AB (MP-25)
3.00.3 10.6 MAX. 10.0 5.9 MIN. 15.5 MAX. 4.8 MAX.
2)TO-262 (MP-25 Fin Cut)
1.00.5
3.60.2
4.8 MAX. 1.30.2
1.30.2
(10) 4
1
2
3
4 123 6.0 MAX.
1.30.2
1.30.2
12.7 MIN.
12.7 MIN.
8.50.2
0.750.3 2.54 TYP.
0.50.2 2.54 TYP. 1.Gate 2.Drain 3.Source 4.Fin (Drain)
2.80.2
0.750.1 2.54 TYP.
0.50.2 2.54 TYP. 1.Gate 2.Drain 3.Source 4.Fin (Drain)
2.80.2
3)TO-263 (MP-25ZJ)
(10) 4 1.00.5 8.50.2 4.8 MAX. 1.30.2
EQUIVALENT CIRCUIT
Drain (D)
5.70.4
1.40.2 0.70.2 2.54 TYP. 1 2
(0
.5R
)
3 2.54 TYP.
(
R 0.8
)
0.50.2
Gate (G)
Body Diode
Remark
Strong electric field, when exposed to this device, can cause destruction of the gate oxide and ultimately degrade the device operation. Steps must be taken to stop generation of static electricity as much as possible, and quickly dissipate it once, when it has occurred.
2.80.2
1.Gate 2.Drain 3.Source 4.Fin (Drain)
Source (S)
Data Sheet D14060EJ1V0DS00
7
2SK3299
* The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. * NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. * Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. * While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. * NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance.
M7 98. 8

▲Up To Search▲

Price & Availability of 2SK3299

	To Download 2SK3299 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .